Polar Floor & Garage Paint
- Regular price
- Sale price
TOUGH & DURABLE – Polar Floor & Garage Paint is a hard-wearing solvent based coating. Ideal for heavy-traffic areas such as warehouses or factories. Our Floor Paint stays compact and durable while giving a high-performance, attractive sheen finish. It stays resistant to many industrial chemicals, dust, moisture, and regular washing with water.
INTERIOR USE – Our high performing Polar Floor & Garage Paint is ideal for use on concrete stone floors in the factory, warehouse, corridor, doorstep, washrooms, commercial floors, and utility room environments. Or take our Floor Paint home and give your garage floors a refreshing & durable new look. Not recommended for use on Bitumen or Asphalt. Not to be used with the Polar Concrete Floor Sealer. Allow new concrete to mature for a minimum of 6 months before applying paint.
NO PRIMER REQUIRED - EASY TO USE - Just ensure the surface is clean & dry, free from dust & dirt. Our Floor & Garage Paint is touch dry in 2-4 hours after applying the first coat. For optimal protection & coverage, apply two even coats - allow minimum coating time of 16-24 hours.
EXCELLENT COVERAGE - Tackle any large garage or warehouse floor with ease and speed. Our Floor Paint spreads at a rate up to 60 square metres per 5 litres, giving excellent coverage while also adding slip resistance and protection against grease and oil spills.
ATTRACTIVE FINISH – Not only does our Floor & Garage paint protect, it provides an attractive mid-sheen finish to your warehouse, corridor, washroom. Give your garage floor that sleek new look in a variety of colours; Light Grey, Black, Yellow, Sea Blue - all with a mid-sheen finish.
How Much Do I Need?
You will need
Use For The Following Surface Types
|Number of Coats||Two|
|Coverage||1 Litre covers up to 12m²
2.5 Litres covers up to 30m²
5 Litres covers up to 60m²
|Dry Time|| Touch Dry in 2-4 hours
Minimum Overcoating time: 16-24 hours
|Colours||Light Grey, Black, Sea Blue, Yellow & White|
|Application||Brush or Solvent Resistant Roller|
|Application Temperature||Above 10°C|
The floor must be allowed to dry.
Any dust or debris should be swept or vacuumed off.
Wall surfaces to be sealed should be brushed dry to remove dust and loose material.
Use a Brush or a Solvent Resistant Roller to apply Floor & Garage Paint.
Coverage will vary dependent on the nature and porosity of the surface and the application method.
Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with white spirit and allowed to dry.
Applying an even coat.
2 coats are normally required, allowing a minimum over coating time of 16-24 hours.
Apply second coat of Floor & Garage Paint after a minimum of 16-24 hours.
Allow 7 days after painting before driving on.
Clean all equipment with white spirit immediately after use.
Keeps for up to 2 years if stored correctly in an unopened container.