
















Product Details
SEALS DAMP - Our unique pliolite formula seals damp patches and prevents penetrating damp from pushing through and spoiling your decor in just one singular coat. 500ml covers up to 4m²
EASY APPLICATION - Ready for use on damp interior wall surfaces including brick, concrete, cement and plaster (not breeze blocks). Our paint can also be used as a damp proofing primer/ sealer prior to over-painting or can be left as a finish in its own right.
BLOCK STAINS INSTANTLY - Advanced formula incorporates a water reacting agent. Premium quality mould resistant paint from experts in damp proofing.
MULTI-PURPOSE USE - Ideal for use on interior walls or ceilings, including plaster, cement, and stone. Suitable for window/door frames, bathroom, living room, garage and kitchen.
Coverage Calculator
How Much Do I Need?
You will need
litres
Use For The Following Surface Types


Technical Specifications
Interior/Exterior | Interior |
---|---|
Number of Coats | Two |
Coverage | 500ml covers up to 4m² 1 Litre covers up to 8m² 2.5 Litres covers up to 20m² |
Dry Time | Touch Dry: 2-3 hours. Re-Coatable: 16-24 hours. Allow for adequate ventilation during the drying period. |
Colours | White, Grey, Black, Magnolia |
Application | Brush or Roller |
Application Temperature | Above 10°C |
Paint Base | Pliolite |
Size | 500ml 1 Litre 2.5 Litres |
Application
Preparation
If there is mould, tackle it with mould killer otherwise, use a cloth and white spirit to wipe down and clean the wall.
Remove as much of the old paint as possible by thorough scraping and wire brushing.
Avoid the inhalation of dust.
Wear a suitable face mask if dry sanding.
Special precautions should be taken during surface preparation of pre 1960s paint surfaces over wood and metal as they may contain harmful lead.
Application
Use a roller or brush to apply it to the affected area.
If it’s only a small damp patch, paint at least 30cm around the area so the damp won’t creep elsewhere.
2 coats are normally required, allowing a minimum over coating time of 16-24 hours.
Finishing Up
Apply second coat of DampSeal after a minimum of 16-24 hours.
Drying time can be extended at lower temperatures.
Clean all equipment with White Spirit.
Keeps for up to 2 years if stored correctly in an unopened container.