Product Details
Heavy foot traffic taken its toll on your concrete floors?
Concrete may be tough – but it’s not invincible.
From time to time, it may need a coat of Polar Floor and Garage Paint.
Ideal for use in both residential and commercial settings, this is the easiest way to give concrete surfaces a fresh and clean look – whilst also bolstering their long-term durability.
Just apply two coats for impressive results.
Why use Polar Floor & Garage Paint
Coverage Calculator
How Much Do I Need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you’ll need to complete your project.
You will need
litres
Use For The Following Surface Types
Concrete
Technical Specifications
| Interior/Exterior | Interior |
|---|---|
| Number of Coats | Two |
| Coverage | 5 Litres covers up to 60m² |
| Dry Time | Touch Dry in 2-4 hours Minimum Overcoating time: 16-24 hours |
| Colours | Dark Grey, Light Grey, Mid Grey, Yellow, White |
| Application | Brush or Solvent Resistant Roller |
| Application Temperature | Above 10°C |
| Paint Base | Solvent |
| Size | 5 Litres |
Application
Preparation
Floor areas must be clean, dry and free of all contamination.
The floor must be allowed to dry.
Any dust or debris should be swept or vacuumed off.
Wall surfaces to be sealed should be brushed dry to remove dust and loose material.
The floor must be allowed to dry.
Any dust or debris should be swept or vacuumed off.
Wall surfaces to be sealed should be brushed dry to remove dust and loose material.
Application
Stir well before use.
Use a Brush or a Solvent Resistant Roller to apply Floor & Garage Paint.
Coverage will vary dependent on the nature and porosity of the surface and the application method.
Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with white spirit and allowed to dry.
Applying an even coat.
2 coats are normally required, allowing a minimum over coating time of 16-24 hours.
Use a Brush or a Solvent Resistant Roller to apply Floor & Garage Paint.
Coverage will vary dependent on the nature and porosity of the surface and the application method.
Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with white spirit and allowed to dry.
Applying an even coat.
2 coats are normally required, allowing a minimum over coating time of 16-24 hours.
Finishing Up
Touch dry in 2-4 hours.
Apply second coat of Floor & Garage Paint after a minimum of 16-24 hours.
Allow 7 days after painting before driving on.
Clean all equipment with white spirit immediately after use.
Keeps for up to 2 years if stored correctly in an unopened container.
Apply second coat of Floor & Garage Paint after a minimum of 16-24 hours.
Allow 7 days after painting before driving on.
Clean all equipment with white spirit immediately after use.
Keeps for up to 2 years if stored correctly in an unopened container.
