Polar Premium Waterproof BitumenSeal Paint
- Regular price
- Sale price
30 DAYS FREE RETURNS
INSTANT WATERPROOF SEAL - The ideal solution for instant and fully waterproof sealant on emergency leaks or cracks. Apply to the affected surface area of the bitumen roof, drainpipe or gutter to instantly seal. Forms a waterproof membrane to keep damp and water out.
LONG-LASTING PROTECTION - Specially formulated with reinforced fibres that interlace to give long-lasting, tough protection. A water-resistant solution gives a waterproof and durable finish. Ideal for emergency repair or maintenance work on drain pipes, gutters, flat and pitched roofs. Gives long-lasting protection to cracked or leaked surfaces, once fully dried and cured.
EASY TO APPLY - No primer is needed prior to application of Polar BitumenSeal. Apply immediately and directly for instant waterproof protection. Clear the affected area of moss and debris and remove any surface water, oil or grease. Use a brush or roller depending on the size of the area affected. Touch dry within 3 hours. Allow 24 hours to fully dry.
ONE COAT REPAIR - Don’t waste any time sealing cracks or leaks. Polar BitumenSeal works in just one coat. Developed to give instant repair on flat or pitched bitumen, asphalt, concrete or brick roofs. Ideal for use on garages, sheds, motorhomes and commercial properties. Apply with a brush or roller for optimal waterproof protection. 500ml covers up to 0.5㎡.
SOLVENT FREE FINISH - Polar BitumenSeal is a solvent-free, water-based solution that provides instant, durable and long-lasting waterproof protection. Available in Grey, White and Black finishes.
How Much Do I Need?
You will need
Use For The Following Surface Types
|Number of Coats||One|
|Coverage||5kg covers up to 5m²|
|Dry Time||Dry in 3 hours|
|Colours||Black, Clear and Grey|
|Application||Brush or Roller|
|Application Temperature||Above 10°C|
|Paint Base||Water Based|
Remove surface water and any contamination such as Oil or Grease.
Allow to dry.
If required apply a Fungicidal Wash to prevent further fungal/algal growth.
Most roofing substrates to be treated will not normally require priming.
Application temperature should be above 10°C.
Do not apply BitumenSeal in the wet.
Use a brush or roller.
Apply a generous amount of BitumenSeal to the required area.
Clean all equipment with water immediately after use.
Clean cured coating with white spirit
Keeps for up to 12 months if stored correctly in an unopened container.