






Product Details
WATER-BASED SOLUTION - Polar Tarmac Black Paint comes in a safe, environmentally friendly, water-based solution. No harmful chemicals are added, making it fully child- and pet-friendly. Ideal for driveways and walkways, this Black Tarmac Paint includes a slip-resistant formula.
ENHANCE & PROTECT - Add a long-lasting protective layer that enhances and revives your painted tarmac or concrete driveway. Protects against oil and petrol spills, weathering, fungus, and weed growth. Provides a tough, durable finish that looks as good as new. For more options, see our Floor Paints Collection.
INTERIOR & EXTERIOR USE - Formulated for both interior and exterior use. Use it to revive and enhance outdoor areas such as driveways, concrete floors, recreational spaces, and car parks, or apply on interior walkways in offices, warehouses, and corridors. More expert guidance on maintaining tarmac surfaces is available from Marshalls
EASY TO APPLY & QUICK DRYING - Application is simple with a brush, roller, or spray. Surfaces should be clean and dry before use. For optimal outdoor results, apply between April and October. Coverage: 2–3㎡ per litre with brush or roller. Apply a minimum of 2 coats, drying within 2–4 hours.
ATTRACTIVE MATT FINISH - Give your tarmac or concrete surfaces a protective matt finish in black, yellow, or white. Adds a subtle sheen while reviving and restoring home driveways. Explore more durable finishes in our Exterior Floor Coatings range.
Coverage Calculator
How Much Do I Need?
You will need
litres
Use For The Following Surface Types



Technical Specifications
Interior/Exterior | Exterior |
---|---|
Number of Coats | Two |
Coverage | 5 Litres covers up to 35m² |
Dry Time | Dry in 2-4 hours |
Colours | Black & Yellow |
Application | Brush or Roller |
Application Temperature | Above 10°C |
Paint Base | Water based |
Size | 5 Litres |
Application
Preparation
Free from loose or flaking material, dirt grease and vegetative growth.
Vacuum or pressure blasting with air or water may remove any debris.
Brushing may be suitable.
If in doubt always test a small area prior to use.
Not to be applied if there is salt contamination or frost.
Application
Surfaces that are cold – below 5°C – are not suitable for coating.
Hot surfaces – above 30°C – should be cooled with water spray before application otherwise paint will dry before film formation is completed.
Apply an even coat either by brush or roller.
New concrete should be allowed to mature for several months before coating.
Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with water and allow to dry.
For exterior surfaces we recommend applying between April to October.
2 coats are normally required.
Finishing Up
Apply a second coat of Tarmac Reviver.
Clean all equipment with water immediately after use.
Keeps for up to 12 months if stored correctly in an unopened container.