











Product Details
Want to banish mould for good? Keen to keep that ‘just painted’ look lasting longer?
Then it’s time to invest in Polar Mould Resistant Paint.
Our specially formulated anti mould paint is so hardwearing it’s washable – and it doesn’t just cover mould. It actively prevents mould from penetrating interior walls and ceilings, keeping your home fresher for longer.
Why use anti-mould paint?
With moisture-resistant properties, Polar bathroom mould paint creates a protective barrier in high condensation areas.
Whether it’s a damp bathroom, a steamy kitchen with poor ventilation, or mould spores creeping into the lounge, this quick-drying anti condensation paint is the answer.
Just two coats protect and refresh your walls.
PREVENT AND CONTROL
Polar anti-mould paint is specifically designed to prevent mould from penetrating interior walls and ceilings.
MOULD RESISTANT
Provides effective mould resistance against mildew growth in areas exposed to moisture or that are prone to high levels of condensation.
Suitable for use on interior wall surfaces including brick, concrete, cement, and plaster (not breeze blocks).
PREPARATION
Ready for use on all interior surfaces where mould has appeared.
Before painting, the surface should be dry, clean, and free from grease, dirt, rust, and loose or flaking material. Then, any mould growth should be given a quick wipe-down with bleach or anti-mould spray and left to dry before the paint is applied.
EASY APPLICATION
Apply Polar Anti-Mould paint to a clean and dry surface, using a paint brush, roller or airless spray.
Drying time is between 2-3 hours and a second coat can be applied after 4 hours.
The spreading rate is up to 11 sq. metres per 1 litre.
INTERIOR USE
Designed for internal use, this mould-resistant paint is ideal for use on:
- Internal walls and ceilings in bathrooms, kitchens, and bedrooms
- Around doors, frames, skylights, cold water pipes, and cooling ducts
Suitable for domestic or public areas, this paint can be used to cover both small and large areas.
Order mould-resistant paint today
If you’re looking for a tough stain block paint formulated for great coverage whilst actively creating an anti-mould barrier to prevent mould from returning, then Polar anti-mould paint is it!
Available in fresh white or creamy magnolia and a choice of conveniently sized tins – 500ml, 1, 2.5, or 5 litres – you can pick the perfect colour and size for your needs.
For more advice on this or any products from our range of anti mould paints, please don't hesitate to get in touch.
Coverage Calculator
How Much Do I Need?
You will need
litres
Use For The Following Surface Types


Technical Specifications
Interior/Exterior | Interior |
---|---|
Number of Coats | Two |
Coverage | 500ml covers up to 5.5m² 1 Litre covers up to 11m² 2.5 Litres covers up to 27.5m² 5 Litres covers up to 55m² |
Dry Time | Touch dry in 2-3 hours. Recoatable after 4 hours. |
Application | Brush or Roller |
Application Temperature | Above 10°C |
Paint Base | Water Based |
Size | 500ml 1 Litre 2.5 Litre 5 Litre |
Application
Preparation
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
Any mould growth should be wiped down with bleach or anti-mould spray, left to dry, then apply the Anti-Mould paint.
Application
Apply an even coat either by brush or roller.
Seal absorbent surfaces with a first coat thinned down with up to 10% clean water.
Apply 2 coats.
Finishing Up
Clean equipment immediately after use with warm soapy water and rinse thoroughly.