
Product Details
From DIY jobs to craft projects, Polar Clear Lacquer Spray is the perfect final touch.
Simple to use and quick drying, it’s the easiest way to enhance the appearance of decorated surfaces, protect against wear and tear, and ensure a durable and flawless finish.
Just spray it on and enjoy the impressive long-lasting results.
Why use Polar Flawless Lacquer Spray
Use For The Following Surface Types
Ceramic
Glass
Metal
Plastic
Wood
Technical Specifications
| Interior/Exterior | Interior & Exterior |
|---|---|
| Number of Coats | Two |
| Coverage | 400ml covers up to 2m² |
| Dry Time | Touch Dry: 15 minutes. Dry: 24 hours |
| Colours | Clear |
| Size | 400ml 2x400ml 4x400ml 6x400ml |
Application
Preparation
Clean the surface thoroughly removing all traces of greases, oils, dirt, grime and un-sound existing coatings.
Mask area to protect from over-spray.
Where over-coating of a previously applied alkyd coating is suspected, always test for suitably of use by applying several coats in an inconspicuous area.
Allow to dry thoroughly to establish absence of wrinkling and other surface defects.
Mask area to protect from over-spray.
Where over-coating of a previously applied alkyd coating is suspected, always test for suitably of use by applying several coats in an inconspicuous area.
Allow to dry thoroughly to establish absence of wrinkling and other surface defects.
Application
Shake the can thoroughly for at least two minutes.
Hold upright, and spray evenly onto the surface from a distance of 25 to 30cm.
If nozzle blocks, invert can and pulse spray until clear. Allow to dry for between 15 and 30 minutes.
When further coats are required, allow 20 minutes between applications.
Hold upright, and spray evenly onto the surface from a distance of 25 to 30cm.
If nozzle blocks, invert can and pulse spray until clear. Allow to dry for between 15 and 30 minutes.
When further coats are required, allow 20 minutes between applications.
Finishing Up
Allow to dry for 24 hours to develop maximum paint hardness.
On completion of use, invert the can and depress the actuator for a few seconds to prevent nozzle blockage.
Keeps for up to 12 months when stored correctly.
On completion of use, invert the can and depress the actuator for a few seconds to prevent nozzle blockage.
Keeps for up to 12 months when stored correctly.
