Product Details
INSTANT WATERPROOF SEAL - The ideal solution for instant and fully waterproof sealant on emergency leaks or cracks. Apply to the affected surface area of the bitumen roof, drainpipe or gutter to instantly seal. Forms a waterproof membrane to keep damp and water out.
LONG-LASTING PROTECTION - Specially formulated with reinforced fibres that interlace to give long-lasting, tough protection. A water-resistant solution gives a waterproof and durable finish. Ideal for emergency repair or maintenance work on drain pipes, gutters, flat and pitched roofs. Gives long-lasting protection to cracked or leaked surfaces, once fully dried and cured.
Why use Polar Premium Waterproof BitumenSeal Paint
Coverage Calculator
How Much Do I Need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you’ll need to complete your project.
You will need
kg
Use For The Following Surface Types
Asphalt
Bitumen
Brick
Concrete
Felt
Metal
PVC
Technical Specifications
| Interior/Exterior | Exterior |
|---|---|
| Number of Coats | One |
| Coverage | 5kg covers up to 5m² |
| Dry Time | Dry in 3 hours |
| Colours | Black, Clear and Grey |
| Application | Brush or Roller |
| Application Temperature | Above 10°C |
| Paint Base | Water Based |
| Size | 5kg |
Application
Preparation
Clear all areas of moss, lichen and debris by brushing or power washing.
Remove surface water and any contamination such as Oil or Grease.
Allow to dry.
If required apply a Fungicidal Wash to prevent further fungal/algal growth.
Most roofing substrates to be treated will not normally require priming.
Remove surface water and any contamination such as Oil or Grease.
Allow to dry.
If required apply a Fungicidal Wash to prevent further fungal/algal growth.
Most roofing substrates to be treated will not normally require priming.
Application
Stir well before use.
Application temperature should be above 10°C.
Do not apply BitumenSeal in the wet.
Use a brush or roller.
Apply a generous amount of BitumenSeal to the required area.
Application temperature should be above 10°C.
Do not apply BitumenSeal in the wet.
Use a brush or roller.
Apply a generous amount of BitumenSeal to the required area.
Finishing Up
Dry in 3 hours.
Clean all equipment with water immediately after use.
Clean cured coating with white spirit
Keeps for up to 12 months if stored correctly in an unopened container.
Clean all equipment with water immediately after use.
Clean cured coating with white spirit
Keeps for up to 12 months if stored correctly in an unopened container.