Polar Specialist Coatings
Polar Tarmac Black Paint | Durable Water-Based Paint for Driveways & Walkways
- Regular price
-
£44.99 - Sale price
-
£44.99
Couldn't load pickup availability
Product Details
Restore tired driveways and walkways with Polar Tarmac Black Paint, a water-based, environmentally friendly solution designed to revive and protect tarmac and concrete surfaces. Safe for use around children and pets, this tough coating delivers long-lasting protection with added slip resistance for everyday safety.
Easy to apply and quick drying, it enhances appearance while shielding surfaces from wear, weathering, and spills—keeping outdoor and indoor areas looking clean and refreshed.
Key Features
Water-Based & Eco-Friendly: Safe, low-odour formula suitable for family homes and public areas.
Enhances & Protects: Revives tarmac and concrete while protecting against oil, petrol spills, weathering, fungus, and weed growth.
Interior & Exterior Use: Ideal for driveways, car parks, recreational areas, warehouses, corridors, and walkways.
Easy Application & Quick Drying: Apply by brush, roller, or spray; dries in 2–4 hours with a minimum of 2 coats recommended.
Reliable Coverage: Covers approximately 2–3m² per litre, depending on surface and application method.
Attractive Matt Finish: Available in Black, Yellow, and White for a clean, refreshed look. Explore more durable finishes in our Exterior Floor Coatings range.
Revive your surfaces with confidence. Choose Polar Tarmac Black Paint for durable protection, easy application, and a long-lasting finish you can trust.
Coverage Calculator
How Much Do I Need?
You will need
litres
Use For The Following Surface Types
Technical Specifications
| Interior/Exterior | Exterior |
|---|---|
| Number of Coats | Two |
| Coverage | 5 Litres covers up to 35m² |
| Dry Time | Dry in 2-4 hours |
| Colours | Black & Yellow |
| Application | Brush or Roller |
| Application Temperature | Above 10°C |
| Paint Base | Water based |
| Size | 5 Litres |
Application
Preparation
Free from loose or flaking material, dirt grease and vegetative growth.
Vacuum or pressure blasting with air or water may remove any debris.
Brushing may be suitable.
If in doubt always test a small area prior to use.
Not to be applied if there is salt contamination or frost.
Application
Surfaces that are cold – below 5°C – are not suitable for coating.
Hot surfaces – above 30°C – should be cooled with water spray before application otherwise paint will dry before film formation is completed.
Apply an even coat either by brush or roller.
New concrete should be allowed to mature for several months before coating.
Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with water and allow to dry.
For exterior surfaces we recommend applying between April to October.
2 coats are normally required.
Finishing Up
Apply a second coat of Tarmac Reviver.
Clean all equipment with water immediately after use.
Keeps for up to 12 months if stored correctly in an unopened container.