
Product Details
Revive tired-looking concrete and add a clean, modern finish with Polar Premium Concrete Stain. Easy to apply and budget-friendly, it’s a simple way to refresh concrete surfaces while adding durable, long-lasting protection.
Designed for both decorative appeal and practical performance, this versatile stain instantly enhances appearance, improves safety, and helps extend the life of your concrete—perfect for indoor and outdoor use.
Key Features
Instant Concrete Transformation: Refreshes worn concrete with a decorative, modern finish.
Interior & Exterior Use: Ideal for driveways, patios, walkways, hallways, staircases, and more.
Slip-Resistant Surface: Improves safety in wet or damp areas.
Durable & Protective: Helps resist oil and fuel stains, weathering, weeds, and fungal growth.
Wide Surface Compatibility: Suitable for concrete, stone, tarmac, macadam, asphalt, and brick.
Excellent Coverage: 5 litres covers up to 30m², reducing the need for touch-ups.
Simple Two-Step Application: Apply Polar Etch Primer, then 1–2 coats of stain depending on surface area.
Quick Drying: Becomes weather-resistant in just 3–4 hours in warm, dry conditions.
Environmentally Friendly: Solvent-free, non-toxic formula safe for children, pets, and the environment.
Attractive Matt Finish: Available in Light Grey and Dark Grey to suit a wide range of spaces.
Upgrade your concrete with confidence. Choose Polar Premium Concrete Stain for a safer, smarter, and longer-lasting finish you’ll love.
Why use Polar Premium Concrete Stain | Decorative & Protective Stain for Concrete Floors
Coverage Calculator
How Much Do I Need?
You will need
litres
Use For The Following Surface Types
Technical Specifications
| Interior/Exterior | Interior & Exterior |
|---|---|
| Number of Coats | Two |
| Coverage | 5 Litres covers up to 30m² |
| Dry Time | Touch Dry in 4 hours. Allow 4 hours between coats. |
| Colours | Light Grey, Dark Grey, Mid Grey & Anthracite |
| Application | Brush or Roller |
| Application Temperature | Above 5°C |
| Paint Base | Water Based |
| Size | 5 Litres |
Application
Preparation
Free from loose or flaking material, dirt grease and vegetative growth.
Not to be applied if there is salt contamination or frost.
Application
Surfaces below 5°C are not suitable for coating.
Surfaces above 30°C should be cooled with water spray before application.
Apply an even coat either by brush or roller.
New concrete should be allowed to mature for several months before coating.
Priming is not normally required. Apply 2 coats.
Finishing Up
Clean equipment immediately after use with warm water and rinse thoroughly.
