
Product Details
Want to revive tired looking concrete? Or maybe just add a decorative touch to your outdoor space? Polar Premium Concrete Stain is the ideal solution.
Easy to apply and budget-friendly, it’s the most effective way to freshen up concrete surfaces – enhancing their appearance, whilst also providing much-needed protection.
Just grab a roller and the job will be done in no time.
Why use Polar Concrete Stain
Coverage Calculator
How Much Do I Need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you’ll need to complete your project.
You will need
litres
Use For The Following Surface Types
Asphalt
Brick
Concrete
Technical Specifications
| Interior/Exterior | Interior & Exterior |
|---|---|
| Number of Coats | Two |
| Coverage | 5 Litres covers up to 30m² |
| Dry Time | Touch Dry in 4 hours. Allow 4 hours between coats. |
| Colours | Light Grey, Dark Grey, Mid Grey & Anthracite |
| Application | Brush or Roller |
| Application Temperature | Above 5°C |
| Paint Base | Water Based |
| Size | 5 Litres |
Application
Preparation
All surfaces should be dry (not damp).
Free from loose or flaking material, dirt grease and vegetative growth.
Not to be applied if there is salt contamination or frost.
Free from loose or flaking material, dirt grease and vegetative growth.
Not to be applied if there is salt contamination or frost.
Application
Stir well before use.
Surfaces below 5°C are not suitable for coating.
Surfaces above 30°C should be cooled with water spray before application.
Apply an even coat either by brush or roller.
New concrete should be allowed to mature for several months before coating.
Priming is not normally required. Apply 2 coats.
Surfaces below 5°C are not suitable for coating.
Surfaces above 30°C should be cooled with water spray before application.
Apply an even coat either by brush or roller.
New concrete should be allowed to mature for several months before coating.
Priming is not normally required. Apply 2 coats.
Finishing Up
Remove as much product as possible from application equipment before cleaning.
Clean equipment immediately after use with warm water and rinse thoroughly.
Clean equipment immediately after use with warm water and rinse thoroughly.
