Grip & Grab – 310ml

£8.99

0 out of 5
View basket

Grip & Grab is a solvent free general purpose building adhesive formulated with high performance polymers eliminating the need for solvents.

Quick Drying
Life expectancy of 20 years when used correctly
Rapid Dry
Ideal for use on most surfaces indoors & ourdoors.
Quality Assurance
Free Technical Support

Description

Grip & Grab is a general purpose building adhesive formulated with high performance polymers eliminating the need for solvents. Excellent wet grab with ample open time for positioning, and dries rapidly producing high bond strength. It is sandable, over paintable, and adheres to all common building and construction materials including polystyrene.

For interior, exterior use, rough, smooth, vertical or horizontal surfaces. Grip & Grab is ideal for fixing to surfaces that will be damaged by mechanical fixings. Non-Flammable.

Ideal For:

  • Fixing skirting boards, architraves, dado rails and coving.
  • Bonding timber frames to brick and stone.
  • Fixing wallboards and plasterboard to battens.
  • Bonding floor grippers and metal edges (on porous surfaces)
  • Bedding and bonding worktops to units.
  • General DIY and repairs.
  • Fixing polystyrene tiles, coving and decorative mouldings.

How To Use

Step 1 – Preparation:

  • All surfaces must be dry and free from dust, grease and any loose material. 
  • If in doubt, remove back to a sound surface. 
  • New concrete or plaster should be allowed adequate time to dry and mature.
  • Highly porous or friable surfaces should first be primed with a dilute solution of PVA Sealer and allowed to dry.

Step 2 – Application:

  • Apply the adhesive as a 6mm diameter “zig zag” bead along the length of one surface to be bonded. 
  • On large panels repeat adhesive beads at 20cm intervals. 
  • Where gap filling is required apply a bead of adhesive around the perimeter sufficient to slightly overfill the gap. 
  • Firmly press the materials together immediately and apply pressure all over. 
  • Item can be repositioned if required within 2 or 3 minutes.
  • On vertical surfaces heavy items should be temporarily supported. Allow 24 hours setting time before removing support.
  • Excess adhesive can be cleaned up with a damp cloth before drying.
  • Bond strength develops rapidly, sufficient for most applications to give an inseparable adhesive joint within 1-2 hours under standard conditions of temperature and humidity.
  • Full bond strength develops within 72 hours depending on the nature of the surface.

Technical Specs

Interior/Exterior Usage Interior & Exterior
Application Method Caulking Tube
Tack Times
    10-15 minutes
Minimum Application Temperature 5°C
Shelf Life 12 months when stored between 4°C and 25°C

We Don't Recommend

  • Should not be used for structural bonding or fixing applications.
  • Do not use in permanently damp or wet areas.

Description

Grip & Grab is a general purpose building adhesive formulated with high performance polymers eliminating the need for solvents. Excellent wet grab with ample open time for positioning, and dries rapidly producing high bond strength. It is sandable, over paintable, and adheres to all common building and construction materials including polystyrene.

For interior, exterior use, rough, smooth, vertical or horizontal surfaces. Grip & Grab is ideal for fixing to surfaces that will be damaged by mechanical fixings. Non-Flammable.

Ideal For:

  • Fixing skirting boards, architraves, dado rails and coving.
  • Bonding timber frames to brick and stone.
  • Fixing wallboards and plasterboard to battens.
  • Bonding floor grippers and metal edges (on porous surfaces)
  • Bedding and bonding worktops to units.
  • General DIY and repairs.
  • Fixing polystyrene tiles, coving and decorative mouldings.

How To Use

Step 1 – Preparation:

  • All surfaces must be dry and free from dust, grease and any loose material.
  • If in doubt, remove back to a sound surface.
  • New concrete or plaster should be allowed adequate time to dry and mature.
  • Highly porous or friable surfaces should first be primed with a dilute solution of PVA Sealer and allowed to dry.

Step 2 – Application:

  • Apply the adhesive as a 6mm diameter “zig zag” bead along the length of one surface to be bonded.
  • On large panels repeat adhesive beads at 20cm intervals.
  • Where gap filling is required apply a bead of adhesive around the perimeter sufficient to slightly overfill the gap.
  • Firmly press the materials together immediately and apply pressure all over.
  • Item can be repositioned if required within 2 or 3 minutes.
  • On vertical surfaces heavy items should be temporarily supported. Allow 24 hours setting time before removing support.
  • Excess adhesive can be cleaned up with a damp cloth before drying.
  • Bond strength develops rapidly, sufficient for most applications to give an inseparable adhesive joint within 1-2 hours under standard conditions of temperature and humidity.
  • Full bond strength develops within 72 hours depending on the nature of the surface.

We Don't Recommend

  • Should not be used for structural bonding or fixing applications.
  • Do not use in permanently damp or wet areas.

Technical Specs

Interior/Exterior Usage Interior & Exterior
Application Method Caulking Tube
Tack Times
    10-15 minutes
Minimum Application Temperature 5°C
Shelf Life 12 months when stored between 4°C and 25°C

Downloads

Product Datasheet

Product Safety Datasheet

Questions & Answers

Reviews

Reviews

There are no reviews yet.

Be the first to review “Grip & Grab – 310ml”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Any Other Upcoming Projects?

Accessories

  • 3 Piece Paint Brush Set

    3 Piece Paint Brush Set

    0 out of 5
    £9.99

You've just added this product to the cart: