Hi, Yes this is hard-wearing for vehicles and regular footfall. Please ensure the surface is completely dry before driving on.
MEGA JUNE SALE:
GET 27% OFF
MEGA JUNE:
27% OFF
USE CODE: JULYSALE
ENDS IN:
ENDS IN:
USE CODE: JULYSALE
Floor & Garage Paint – 20 Litres
£150.67
In Stock
Out Of Stock
Polar Garage & Floor Paint is ideal for use on all concrete and stone floors when you’re after a clean mid sheen finish with high chemical resistance.
| Touch Dry 2-4 Hours (Over Coat 16-24 Hours) | |
| 12 sq Meters/Litre | |
| Hard Wearing Polyurethane & Mid-Sheen Finish | |
| Concrete & Stone – Garages, Washrooms, Commercial Units & Corridors | |
| Quality Assurance | |
| Free Technical Support |
Description
For use on concrete and stone floors in the factory, warehouse, garage, corridor and utility room environments. Hard-wearing polyurethane with an attractive mid-sheen finish. Resistant to many industrial chemicals and regular washing with water. Provides a cleaner, dust-free working environment.
- Hard wearing solvent based Polyurethane coating for concrete and stone
- Resistant to many industrial chemicals and regular washing with water
- Ideal for use on concrete and stone floors in the factory, warehouse, garage, corridor and utility room environments.
- Mid-sheen Finish
How To Use
Step 1 – Preparation:
- All surfaces to be painted should be clean and dry, free from dust, dirt, grease, oil, laitance and loose or flaking materials.
- New concrete should be allowed to mature for a minimum of 6 months before paint can be applied.
- Chemically or mechanically hardened floors may need abrasion, prior to application.
- If in doubt always test a small area prior to use.
Step 2 – Application:
- Stir well before use.
- Supplied ready for use.
- Use a Brush or a Solvent Resistant Roller to apply Floor & Garage Paint.
- Coverage will vary dependent on the nature and porosity of the substrate and the application method.
- Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with white spirit and allowed to dry.
- Applying an even coat, 2 coats are normally required, allowing a minimum over coating time of 16-24 hours.
Technical Specs
| Interior/Exterior Usage | Interior |
| Coats | 2 coats required |
| Application Method | Brush & Solvent Resistant Roller |
| Type | Solvent Based |
| Coverage |
|
| Drying Times | At Above 10°C
|
| Minimum Application Temperature | 10°C |
| Shelf Life | Up to 2 years if stored correctly in an unopened container. |
We Don't Recommend
- Bitumen
- Asphalt
- External Surfaces
Description
For use on concrete and stone floors in the factory, warehouse, garage, corridor and utility room environments. Hard-wearing polyurethane with an attractive mid-sheen finish. Resistant to many industrial chemicals and regular washing with water. Provides a cleaner, dust-free working environment.
- Hard wearing solvent based Polyurethane coating for concrete and stone
- Resistant to many industrial chemicals and regular washing with water
- Ideal for use on concrete and stone floors in the factory, warehouse, garage, corridor and utility room environments.
- Mid-sheen Finish
How To Use
Step 1 – Preparation:
- All surfaces to be painted should be clean and dry, free from dust, dirt, grease, oil, laitance and loose or flaking materials.
- New concrete should be allowed to mature for a minimum of 6 months before paint can be applied.
- Chemically or mechanically hardened floors may need abrasion, prior to application.
- If in doubt always test a small area prior to use.
Step 2 – Application:
- Stir well before use.
- Supplied ready for use.
- Use a Brush or a Solvent Resistant Roller to apply Floor & Garage Paint.
- Coverage will vary dependent on the nature and porosity of the substrate and the application method.
- Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with white spirit and allowed to dry.
- Applying an even coat, 2 coats are normally required, allowing a minimum over coating time of 16-24 hours.
We Don't Recommend
- Bitumen
- Asphalt
- External Surfaces
Technical Specs
| Interior/Exterior Usage | Interior |
| Coats | 2 coats required |
| Application Method | Brush & Solvent Resistant Roller |
| Type | Solvent Based |
| Coverage |
|
| Drying Times | At Above 10°C
|
| Minimum Application Temperature | 10°C |
| Shelf Life | Up to 2 years if stored correctly in an unopened container. |
Questions & Answers
Hi, We recommend waiting 6 months if this is brand new concrete put down and then applying the floor paint. If the concrete is 6 months old then you can apply the floor paint no problem. If you don't want to wait that long, you can use a clear concrete sealer or block paving sealer to protect the floor.
Hi, We would only recommend it for concrete and stone floors.
Hi, Yes, usually you can apply around a week after!
Reviews
5/5
Great product. Recommend it
Garage overhaul stripped out and cleaned and walls painted white. Wanted To paint concrete floor grey and Found polar on google. With discount was comparable to other makes but slightly cheaper so I gave it a go. Very pleased on the result. Cleaned and scrapped years of paint and oil from floor before painting including bottom two bricks giving it a boarder. Easy just apply like normal paint didn’t prep or seal concrete. Didn’t even dilute 10% as recommended. Just applied with brush and roller and it spreads well and covers great. All marks covered up non showing through. You just open tin, stir and apply it’s that easy. Garage looks amazing even the missus made a comment it looks good. Nice light grey colour with sheen makes it brighter. Cannot fault it. It took a week to arrive rather than next day but was worth the wait. I would recommend this to anyone and everyone. I took photos of the transformation pity I can’t add to the review but looks great. Good purchase.
5/5
EXCELLENT PRODUCT AT A GREAT PRICE.
Ordered the paint online to take advantage of the 27% off in June deal having seen grey was in stock. Money taken out of my account, then told soon after that there had been a miscalculation of stock and the paint would not be available until the following Monday and would be with me 24 hours later on the Tuesday after. Of course it will I thought! Oh me of little faith!! 8am on the Tuesday the paint arrived! Applied the paint with a roller and it went on top of previous paint and some bare concrete really well and is easy to apply. My garage is 16 sq metres and I’ve used about a quarter of the 5 litres. It looks really good when dry with a satin finish. There is a pungent smell but nothing too overpowering with the garage door wide open. Only time will tell if it stands up to the demands of everyday life in my garage.
Incidentally I previously applied a product from a well known DIY store made by R…..L that was expensive and was not up to the job at all. So we shall see!
5/5
Brilliant All Round
No dislikes, all likes. Easy to apply sticks to concrete. The best one so far, can’t fault it, very good value for money.
5/5
Good Product
Very good product covers well. Applied by brush due to the floor being very old and rough. Obtained about 14m2 per litre so you should consider this when ordering. Have have another 5litres on order for the second coat.
5/5
Goes on nice and gives a tough finish
It applies nicely and gives good coverage. The finish is pleasant visually and robust. It does make sense to wear a respiratory mask when applying because it does release a potent vapour. Recommended.
5/5
Excellent Product!
This paint is great, not only was it £10 cheaper (for a much bigger tin) than the big DIY chain store equivalent, but it did the job perfectly despite the floor being old and in a poor state. The seller was quick and the whole thing was hassle-free. Many thanks
