Exterior Masonry Wall Guard – 5 Litres

£38.94

In Stock

Out Of Stock

Clear

Wall Guard is a Smooth, high-performance water-based eco-friendly exterior wall coating for a long-lasting decorative finish that also protects and helps improve insulation.

4-6 hours (re-coat)
16m²/Litre (2 coats recommended)
Contains ceramic spheres to help reduce energy consumption by helping to improve the insulating properties of your walls
Suitable for the decoration of external substrates including concrete, brick work, asbestos, cement & renderings, brick, stone, blockwork and pebbledash. Also suitably primed aluminium, iron work & surfaces previously painted with emulsions or oil paints
Quality Assurance
Free Technical Support

Description

Our Masonry Exterior Wall Guard is ideal for protecting and decorating dwellings such as houses, annexes, cottages and commercial properties looking for a pleasing and ecological protective coating.

  • Smooth, high-performance water-based eco-friendly exterior wall coating for a long-lasting decorative finish that also protects and improves insulation.
  • Elastic – waterproof and water vapour permeable.
  • Contains algicide and fungicide.
  • Hard wearing, long lasting, flexible and elastic – waterproof and water vapour permeable.

How To Use

Step 1 – Preparation:

  • It is important that very damp or wet walls are not coated.
  • Building faults that allow moisture to enter walls, e.g. broken rainwater downspouts, guttering and coping stones.etc, should be repaired before coating.
  • Algae or Fungal deposits should first be removed by power washing the surface and then coated with FungiSeal.
  • The substrate to be coated should be sound, free from dirt, grease, oil, dust, chalk and friable material.
  • Hairline cracks can be successfully covered but substantial cracks should be filled with a proprietary sealant.

Step 2 – Application:

  • Exterior Wall Guard can be applied by Brush or Roller.
  • Coverage will be determined by the nature of the substrate, temperature and application method.

Previously Painted Surfaces (Pebble Dash & Rough Cast Renders)

  • As a guide up to 8 square metres/litres per coat.
  • 1 coat may be sufficient but normally 2 coats.

For Smooth Walls

  • As a guide up to 16 square metres/litre per coat.
  • 1 coat may be sufficient but normally 2 coats.

These figures are only an approximate guide and may be reduced. If in doubt, apply a small trial area first.

How Much Do I Need?

Recommended Coats

2

Calculate

Technical Specs

Interior/Exterior Usage Exterior
Coats 2 coats recommended
Application Method Brush & Roller
Type Water Based
Coverage
  • 5 Litres covers up to 80m²
Drying Times
  • Touch Dry: 1-2 hours
  • To Re-coat: 4-6 hours (under normal drying conditions)
Minimum Application Temperature 10°C
Shelf Life Up to 12 months if stored correctly in an unopened container

We Don't Recommend

  • Glazed Bricks
  • Faience Tiles
  • Engineering Bricks
  • When Heavy Rain Is Likely

How Much Do I Need?

Recommended Coats

2

Calculate

Description

Our Masonry Exterior Wall Guard is ideal for protecting and decorating dwellings such as houses, annexes, cottages and commercial properties looking for a pleasing and ecological protective coating.

  • Smooth, high-performance water-based eco-friendly exterior wall coating for a long-lasting decorative finish that also protects and improves insulation.
  • Elastic – waterproof and water vapour permeable.
  • Contains algicide and fungicide.
  • Hard wearing, long lasting, flexible and elastic – waterproof and water vapour permeable.

How To Use

Step 1 – Preparation:

  • It is important that very damp or wet walls are not coated.
  • Building faults that allow moisture to enter walls, e.g. broken rainwater downspouts, guttering and coping stones.etc, should be repaired before coating.
  • Algae or Fungal deposits should first be removed by power washing the surface and then coated with FungiSeal.
  • The substrate to be coated should be sound, free from dirt, grease, oil, dust, chalk and friable material.
  • Hairline cracks can be successfully covered but substantial cracks should be filled with a proprietary sealant.

Step 2 – Application:

  • Exterior Wall Guard can be applied by Brush or Roller.
  • Coverage will be determined by the nature of the substrate, temperature and application method.

Previously Painted Surfaces (Pebble Dash & Rough Cast Renders)

  • As a guide up to 8 square metres/litres per coat.
  • 1 coat may be sufficient but normally 2 coats.

For Smooth Walls

  • As a guide up to 16 square metres/litre per coat.
  • 1 coat may be sufficient but normally 2 coats.

These figures are only an approximate guide and may be reduced. If in doubt, apply a small trial area first.

We Don't Recommend

  • Glazed Bricks
  • Faience Tiles
  • Engineering Bricks
  • When Heavy Rain Is Likely

Technical Specs

Interior/Exterior Usage Exterior
Coats 2 coats recommended
Application Method Brush & Roller
Type Water Based
Coverage
  • 5 Litres covers up to 80m²
Drying Times
  • Touch Dry: 1-2 hours
  • To Re-coat: 4-6 hours (under normal drying conditions)
Minimum Application Temperature 10°C
Shelf Life Up to 12 months if stored correctly in an unopened container

WE THINK YOU MIGHT LIKE

  • Moss Remover – 5 Litres

    5.00 out of 5
    £29.46

Downloads

Product Datasheet

Product Safety Datasheet

Questions & Answers

Hi, As it’s water-based, warm salty water should do the trick!
Hi, Yes it can. Ensure surface is clean before applying.

Reviews

5/5
White masonry paint is very good

Good quality paint. Very elasticy which should keep out the elements. Be worth wearing a face mask as has pesticides in which I didn’t know till after application

5/5
Great coverage lovely colour

So pleased with this masonry paint used it to paint a garden wall consistency of paint and the coverage was superb, and the colour matched the tendentious g on my house perfectly. I am buying more todo another wall

5/5
Great!

Completely transformed my dull terrace – see before & after photos – the lid was quite hard to open but once I managed it it was fine. Would recommend to anyone!

5/5
Best outdoor coating I have used!

Incredible coverage could have survived with one coat, but, a tin goes a considerable way, so, no bother putting 2 coats on. The finish is very smooth, we have used it indoors in our utility room. looks great.

5/5
Great product

Excellent paint will be ordering more.

5/5
Fantastic

Fab paint, super smooth, quick-drying easy to apply.

Review of Exterior Masonry Wall Guard
What name should be displayed with your review?
What title should be displayed with your review?

Any Other Upcoming Projects?

Waterproofing

Flooring

Accessories

You've just added this product to the cart:

Your Cart