Hi, Yes it is a solar reflective white.
FEBRUARY SALE:
GET 5% OFF
FEBRUARY SALE:
5% OFF
USE CODE: FEBRUARY5
ENDS IN:
ENDS IN:
USE CODE: FEBRUARY5
BitumenSeal – 20kg
£101.04
In Stock
Out Of Stock
BitumenSeal is a Solvent Free Roof Coating with Excellent Flexibility, Durability and is Ideal for a Wide Range of Roofing Repairs
| 3 Hours DO NOT APPLY IN THE WET! | |
| 1-2kg per Sq Meter | |
| Elastomeric, water resistant and long-life coating | |
| Flat & Pitched Roofs – Roofing Felt, Abestos, Cement & Asphalt | |
| Quality Assurance | |
| Free Technical Support |
Description
For use on concrete and stone floors in the factory, warehouse, garage, corridor and utility room environments. Hard-wearing polyurethane with an attractive mid-sheen finish. Resistant to many industrial chemicals and regular washing with water. Provides a cleaner, dust-free working environment.
- Hard wearing solvent based Polyurethane coating for concrete and stone
- Resistant to many industrial chemicals and regular washing with water
- Ideal for use on concrete and stone floors in the factory, warehouse, garage, corridor and utility room environments.
- Mid-sheen Finish
How To Use
Step 1 – Preparation:
- All surfaces to be painted should be clean and dry, free from dust, dirt, grease, oil, laitance and loose or flaking materials.
- New concrete should be allowed to mature for a minimum of 6 months before paint can be applied.
- Chemically or mechanically hardened floors may need abrasion, prior to application.
- If in doubt always test a small area prior to use.
Step 2 – Application:
- Stir well before use.
- Supplied ready for use.
- Use a Brush or Roller to apply Floor & Garage Paint.
- Coverage will vary dependent on the nature and porosity of the substrate and the application method.
- Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with white spirit and allowed to dry.
- Applying an even coat, 2 coats are normally required, allowing a minimum over coating time of 16-24 hours.
Technical Specs
| Interior/Exterior Usage | Interior |
| Coats | 2 coats required |
| Application Method | Brush & Roller |
| Type | Solvent Based |
| Coverage |
|
| Drying Times | At Above 10°C
|
| Minimum Application Temperature | 10°C |
| Shelf Life | Up to 2 years if stored correctly in an unopened container. |
We Don't Recommend
- Bitumen
- Asphalt
- External Surfaces
How Much Do I Need?
Recommended Coats
1
Description
For use on concrete and stone floors in the factory, warehouse, garage, corridor and utility room environments. Hard-wearing polyurethane with an attractive mid-sheen finish. Resistant to many industrial chemicals and regular washing with water. Provides a cleaner, dust-free working environment.
- Hard wearing solvent based Polyurethane coating for concrete and stone
- Resistant to many industrial chemicals and regular washing with water
- Ideal for use on concrete and stone floors in the factory, warehouse, garage, corridor and utility room environments.
- Mid-sheen Finish
How To Use
Step 1 – Preparation:
- All surfaces to be painted should be clean and dry, free from dust, dirt, grease, oil, laitance and loose or flaking materials.
- New concrete should be allowed to mature for a minimum of 6 months before paint can be applied.
- Chemically or mechanically hardened floors may need abrasion, prior to application.
- If in doubt always test a small area prior to use.
Step 2 – Application:
- Stir well before use.
- Supplied ready for use.
- Use a Brush or Roller to apply Floor & Garage Paint.
- Coverage will vary dependent on the nature and porosity of the substrate and the application method.
- Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with white spirit and allowed to dry.
- Applying an even coat, 2 coats are normally required, allowing a minimum over coating time of 16-24 hours.
We Don't Recommend
- Bitumen
- Asphalt
- External Surfaces
Technical Specs
| Interior/Exterior Usage | Interior |
| Coats | 2 coats required |
| Application Method | Brush & Roller |
| Type | Solvent Based |
| Coverage |
|
| Drying Times | At Above 10°C
|
| Minimum Application Temperature | 10°C |
| Shelf Life | Up to 2 years if stored correctly in an unopened container. |
WE THINK YOU MIGHT LIKE
Reviews
[ultimate-reviews product_name='BitumenSeal']
[submit-review product_name='BitumenSeal']
